Table of Contents
Advertisement
[AC VOLTAGE]
[ON COUNT]
[UPGRADE KIT]
[SLOT]
[OPERATING MODE]
[NORMAL]
[ECO]
[QUIET]
*2
[QUIET1]
*3
[QUIET2]
*3
[USER1]
[USER2]
[USER3]
[CONSOLIDATED RUNTIME]
[SIGNAL INFORMATION]
*1 The temperature status is indicated with text color (green/yellow/red) and bar scale. Use the projector within the range that the indication is
green.
*2 Only for PT-RCQ80
*3 Only for PT-RCQ10
*4 [CONSOLIDATED RUNTIME] can be obtained with the following calculation formula. Values obtained by the calculation formula contain a
slight error.
A x 1.0 + B x 0.8
f A: Runtime of the light source with [OPERATING MODE] set to [NORMAL], [QUIET], [QUIET1], [QUIET2], [USER1], [USER2], or [USER3]
f B: Runtime of the light source with [OPERATING MODE] set to [ECO]
r [DETAILED INFORMATION]
[INPUT]
[SIGNAL FORMAT]
[SIGNAL FREQUENCY]
[SCAN TYPE]
[TOTAL DOTS]
[DISPLAY DOTS]
[TOTAL LINES]
[DISPLAY LINES]
[SAMPLING]
[BIT DEPTH]
[SIGNAL LEVEL]
164 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the input supply voltage.
[POWER ON TIMES]
[ET-UK20]
[ET-CUK10]
[ET-NUK10]
Displays the product model number of the Interface Board installed in the slot.
Also, the firmware version is displayed after the product model number.
Displays the setting value of the [PROJECTOR SETUP] menu → [OPERATION SETTING] →
[OPERATING MODE].
Displays the runtime of the light source with [OPERATING MODE] set to [NORMAL].
Displays the runtime of the light source with [OPERATING MODE] set to [ECO].
Displays the runtime of the light source with [OPERATING MODE] set to [QUIET]/[QUIET1].
Displays the runtime of the light source with [OPERATING MODE] set to [QUIET2].
Displays the runtime of the light source with [OPERATING MODE] set to [USER1].
Displays the runtime of the light source with [OPERATING MODE] set to [USER2].
Displays the runtime of the light source with [OPERATING MODE] set to [USER3].
Converts the total runtime of the light sources with [OPERATING MODE] set to each item into the
time used with the [NORMAL] setting.
*4
The consolidated runtime is used for a rough indication about when to perform maintenance when the
projector is used in combination of each item in [OPERATING MODE].
[INPUT]
[SIGNAL FORMAT]
[LINK]
[SAMPLING]
[BIT DEPTH]
[SIGNAL LEVEL]
Conversion formula for [CONSOLIDATED RUNTIME]
Displays the input terminal used for the projected image.
Displays the format of the input signal.
Displays the frequency of the input signal.
Displays the scan type of the input signal.
Displays the total dot count of the input signal.
Displays the number of input signal display dots.
Displays the total line count of the input signal.
Displays the number of input signal display lines.
Displays the sampling information and the color format of the input signal.
Displays the gradation of the input signal.
Displays the signal level of the input signal.
Displays the number of times the power is turned on.
Displays the activation status by the Upgrade Kit (Model No.:
ET-UK20).
Displays the activation status by the Auto Screen Adjustment
Upgrade Kit (Model No.: ET-CUK10).
Displays the activation status by the NFC Upgrade Kit (Model No.:
ET-NUK10).
Or, displays the status of the NFC function.
[ACTIVATED]: The NFC function can be used.
[NOT ACTIVATED]: The NFC function cannot be used.
Displays the input terminal used for the projected image.
Displays the representative input terminal when one image is
displayed with multiple input signals.
Displays the format of the input signal.
Displays the [SDI LINK] setting.
Displays the determination result of the signal when set to [AUTO].
Displays the sampling information and the color format of the input
signal.
Displays the gradation of the input signal.
Displays the signal level of the input signal.
Advertisement
Table of Contents
