Table of Contents
Advertisement
3)
Press as to select [PICTURE MODE].
4)
Press qw to set [REC709].
5)
Press as to select [GAMMA].
6)
Press qw or the <ENTER> button.
f The [GAMMA] individual adjustment screen is displayed.
7)
Press qw to select [2.2].
8)
Press as to select [COLOR].
9)
Press the <DEFAULT> button on the remote control to set the factory default setting.
10) Follow Steps 8) - 9) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], [GAMMA], and [SYSTEM
DAYLIGHT VIEW] to the factory default settings.
Note
f sRGB is available for RGB signal input only.
100 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
Advertisement
Table of Contents
