Table of Contents
Advertisement
f When [BACKUP INPUT MODE] is set to anything other than [OFF], the combination of that input is displayed in [PRIMARY INPUT] and
[SECONDARY INPUT] of the [BACKUP INPUT SETTING] screen.
f [BACKUP INPUT STATUS] is displayed in the input guide (x page 135) and the [STATUS] screen (x pages 85, 163) when [BACKUP
INPUT MODE] is set to anything other than [OFF].
When the signal can be switched to the backup input signal using the backup function, [ACTIVE] is displayed in [BACKUP INPUT STATUS].
When it is not possible, [INACTIVE] is displayed instead.
The secondary input will be the backup input when [BACKUP INPUT STATUS] is displaying [ACTIVE] while the image from the primary
input is displayed.
The primary input will be the backup input when [BACKUP INPUT STATUS] is displaying [ACTIVE] while the image from the secondary
input is displayed.
f When [BACKUP INPUT MODE] is set to anything other than [OFF], the input is switched seamlessly if the input is switched between the
primary input and the secondary input while it is possible to switch to the backup input signal.
f When [AUTOMATIC SWITCHING] is set to [ENABLE], and [BACKUP INPUT STATUS] shows [ACTIVE], the signal is switched to the
backup input if a disruption occurs in the input signal.
f When [AUTOMATIC SWITCHING] is set to [ENABLE], the indication in [BACKUP INPUT STATUS] will change to [INACTIVE] if the input
signal is disrupted and automatically switches to the backup input. In this case, it is not possible to switch to the backup input signal until the
original input signal is restored. If the input has switched to the backup input automatically, it is possible to switch to the backup input signal
when the original signal has been restored. In this case, the current input is maintained.
f When [SDI LINK] for the primary input and the secondary input is set to [AUTO], [BACKUP INPUT MODE] for that combination cannot
be selected. When [SDI LINK] for the primary input and the secondary input do not match, [BACKUP INPUT MODE] for that combination
cannot be selected.
Match the setting in accordance with the signal and then input the same signal in the primary input and the secondary input.
g The [DISPLAY OPTION] menu → [SLOT IN] → [SDI LINK]
f The primary input setting values are applied to image adjustment values such as the [PICTURE] menu → [PICTURE MODE], [GAMMA],
and [COLOR TEMPERATURE].
f When the combination of inputs in [BACKUP INPUT MODE] is the SDI input and DVI-D input or the SDI input and HDMI input, the backup
function is enabled only in the following combination of signals.
Primary input
HD-SDI 720/60p YP
P
4:2:2
B
R
HD-SDI 720/50p YP
P
4:2:2
B
R
3G-SDI 1080/60i RGB
3G-SDI 1080/50i RGB
3G-SDI 1080/24p RGB
3G-SDI 1080/25p RGB
3G-SDI 1080/30p RGB
3G-SDI 1080/60p YP
P
4:2:2
B
R
3G-SDI 1080/50p YP
P
4:2:2
B
R
[SECONDARY INPUT]
Set the secondary input switching function that will automatically switch to the specified input when the input
signal of projecting image is discontinued.
1)
Press as to select [NO SIGNAL SETTING].
2)
Press the <ENTER> button.
f The [NO SIGNAL SETTING] screen is displayed.
3)
Press as to select [SECONDARY INPUT].
4)
Press the <ENTER> button.
f The [SECONDARY INPUT] screen is displayed.
5)
Press as to select the input to be specified as the switching destination, and press the <ENTER>
button.
[OFF]
[HDMI]
[DVI-D]
[SDI]
[DIGITAL LINK]
*1
[HDMI1 [SLOT]]
*2
[HDMI2 [SLOT]]
*2
[DVI-D1 [SLOT]]
*2
[DVI-D2 [SLOT]]
*2
Chapter 4 Settings — [PROJECTOR SETUP] menu
[SDI]
Disables the secondary input switching function.
Sets the secondary input to HDMI.
Sets the secondary input to DVI-D.
Sets the secondary input to SDI.
Sets the secondary input to DIGITAL LINK
Sets the secondary input to HDMI1 of the Interface Board.
Sets the secondary input to HDMI2 of the Interface Board.
Sets the secondary input to DVI-D1 of the Interface Board.
Sets the secondary input to DVI-D2 of the Interface Board.
Secondary input
[DVI-D]/[HDMI]
720/60p YP
P
4:4:4
B
R
720/50p YP
P
4:4:4
B
R
1080/60i RGB
1080/50i RGB
1080/24p RGB
1080/25p RGB
1080/30p RGB
1080/60p YP
P
4:4:4
B
R
1080/50p YP
P
4:4:4
B
R
.
*1
ENGLISH - 153
Advertisement
Table of Contents
