Table of Contents
Advertisement
4.15
Forced Clear
You can clear the communication line as below when it cannot be cleared through
normal means. This procedure is done from the Administration mode. See page
2-10 for how to choose the Administration mode.
1. Press [FUNC Quit], [6] and [0] to display the Forced Clear display.
Note: If you are not currently connected the message "MES is idle." is
2. Press [8], [2] to clear the current connection. The display shows "Now
clearing" followed by "Call cleared." After the call is cleared the main menu
appears.
3. Press the [FUNC Quit] key to close the menu.
6 0 F o r c e d C l e a r
C u r r e n t
A R E
C l e a r : [ 8 2 ]
ForcedClear display
displayed and three seconds later the standby display appears.
4. HANDSET COMMUNICATIONS
C a l l
w i l l
b e
c l e a r e d .
Y O U
S U R E ?
4-29
Advertisement
Table of Contents
