Table of Contents
Advertisement
4.7
Intercom
In the MES network on board the vessel you can communicate with a telephone
by dialing its intercom number. Note the intercom communications are not saved
to the communications log. For intercom communications by telephone, see page
5-6.
4.7.1
Using the intercom
1. Pick up the handset.
2. Press the [Intercomm] key.
3. Enter intercom number (1-3) of telephone you wish to call. (If you dial an
invalid number, you will hear the "busy tone". Hang up the handset and dial
again.)
4. Press the [ ] key upon completion of call. The intercom display is erased and
the standby display appears.
4.7.2
When receiving a call during intercom use
When you receive an outside call while talking via the intercom, you will hear
three beeps of 0.3 seconds duration followed by 2.1 seconds of no tone. Press
the [ ] key to conclude intercom use, and then press the [
communicate.
4. HANDSET COMMUNICATIONS
2 0 0 0 - 0 8 - 2 9
1 2 : 3 4
U T C
I n t e r c o m
P O R
R e a d y
"Intercom" display
] key to
4-13
Advertisement
Table of Contents
