Table of Contents
Advertisement
3.4.2
Programming
1. Press [F3] and [5] to display the Program Telex display. If there are no
programs entered, the display looks like the one shown below.
2. Select unused number and press the space bar to enter program data.
3. Press [1] (or tap the space bar) to display the Station List.
4. Operate the arrow keys to select station desired and then press the [Enter]
key. The Edit display appears.
5. Press [2] to show the LES list.
6. Operate the arrow keys to select LES desired and then press the [Enter] key.
7. Set appropriate floppy disk into the disk drive on the terminal unit. At the Edit
display, press [3] to display the file list.
Note: If file is not specified, the file "POSITION.RPT" (ship's position) is
No.
LES
-Destination-
01<<<No data >>>
02<<<No data >>>
08<<<No data >>>
To change status:ENTER To edit:SPACE To quit:ESC
Program telex display
1:Station Name
[Telex No.
2:LES Access Code:
3:File to Send
4:Program Mode
To open table: SPACE
Edit display for program telex
automatically selected and sent when the time specified arrives.
Sample position report file
3. TELEX COMMUNICATIONS
Program Telex
-Filename-
Edit (No.1)
:
]
:
: POSITION. RPT [default]
:
[
To quit: ESC
-Mode- Status
ENTRY
DELETE
]
3-19
Advertisement
Table of Contents
