Deleting Programs - Furuno Felcom 82 Operator's Manual

11. Press the [Enter] key to register program. The display shows the particulars
of the program registered.
12. To enable a program, press the [Enter] key. "ON" appears in the Status
column. Transmission starts at the interval selected at step 9.
13.To return to the standby display, press the [Esc] key twice.
3.4.3

Deleting programs

1. At the standby display, press [F3] and [5] to select Program Telex.
2. Operate the arrow keys to select program to erase and then tap the space
bar.
3. Press the [ ] key and then press the [ ] key to select DELETE.
4. Press the [Enter] key to delete the program.
5. Press the [Esc] key to return to the standby display.
Program Telex
No. LES - Destination - - Filename - - Mode - Status
01 222 FURUNO
Sample program telex list
3. TELEX COMMUNICATIONS
POSITION.RPT Interval OFF
3-21