Optional Telephone/Fax Setup; Restricting Telephone Call Length - Furuno Felcom 82 Operator's Manual

4. HANDSET COMMUNICATIONS
4.16

Optional Telephone/Fax Setup

The TELFAX menu functions to set up the telephones and faxes of the FELCOM
82 system.
This procedure is done from the Administration mode. See page 2-10 for how to
choose the Administration mode.
4.16.1

Restricting telephone call length

You may restrict telephone call length on outgoing calls from telephones. (You
cannot restrict call length for the handset or internal calls.) The default setting is
no time limit. When it is 30 seconds before the time limit is to arrive, an audible
warning sounds in the telephone or handset to alert the user. For forwarded calls
the call time is counted from when the call was received.
If no OID/DID is set for a telephone the Time Limit menu shows "NONE" for the
telephone which does not have an OID/DID number. You may restrict call length
for such a telephone, however the setting is shown as NONE unless an OID/DID
number is entered.
How to restrict telephone call length
1. Press [FUNC Quit], [7] and [1] to show the Time Limit menu. ("NONE"
appears instead of OFF or ON when no OID/DID is registered.)
2. Press appropriate numeric key to select TEL1, TEL2 or TEL3.
4-30
7 1 T i m e L i m i t
1 T E L 1 : O F F
2 T E L 2 : O F F
3 T E L 3 : O F F
S e l e c t : [ E n t ]
Time limit menu
7 1 T i m e L i m i t
T E L 1
1 O F F
2 L i m i t T i m e
3 A n s w e r O n l y
E n t e r : [ E n t ]
Time limit selections