Table of Contents
Advertisement
3. TELEX COMMUNICATIONS
3.5
Receiving
3.5.1
Receiving routine messages
When you receive a routine telex message the audible alarm sounds. (The alarm
does not sound when it is disabled at Incoming Call Alarm on the Terminal Setup
menu ([F4], [3] and [6])). The message fills the "Telex Online" display shown
below and is printed. You can silence the alarm by pressing [F9].
Retrieving routine messages
All received routine messages are stored in the communications memory (16K
byte capacity). To retrieve a message from the communications memory, do the
following:
1. Press the [B] key while pressing and holding down the [Alt] key.
2. You can scroll the screen by pressing and holding down the [Fn] key while
pressing [ ↑ ] or [ ↓ ].
Note: When the terminal unit is turned off all contents of the communications
memory (transmitted and received routine messages) are cleared.
Therefore, you may wish to save or print out important messages. For how
to print the communications memory see paragraph 3.8.5 on page 3-33.
3-22
Telex Online
Telex online display
Advertisement
Table of Contents
