Table of Contents
Advertisement
3.5.2
Receiving confidential messages
When you receive a confidential message the audible alarm sounds and the
display shows the message "Confidential message received". (The alarm does
not sound when it is disabled at Incoming Call Alarm on the Terminal Setup menu
([F4], [3] and [6])). To silence the alarm, press [F9].
Confidential messages are neither displayed nor printed, however they are stored
in the confidential message memory (capacity: 16K bytes). When this memory
becomes full, the oldest confidential message is deleted to make room for the
latest.
Retrieving confidential messages
1. At the standby display, press [F3] and [6] to select Confidential Msg.
2. Operate the arrow keys to select the message you want to retrieve.
(Messages with a password are marked with an asterisk. Enter password.
Password is not displayed during or after its entry.)
3. Press the [Enter] key to retrieve the message.
Confidential Message
No.
Addressee-
-Prty-
1
FURUNO
Rou
2*
SAITO
Rou
<<< End of Message >>>
To print:CTRL+P
To view:ENTER
Confidential message list
password:
Password input screen
3. TELEX COMMUNICATIONS
-RX Time-
-Duration-
00-09-19 17:30
00:03'00
00-04-10 15:25
00:02'17
To delete:DEL
-Size
235
149
To quit:ESC
3-23
Advertisement
Table of Contents
