3. TELEX COMMUNICATIONS
3.3
Manual Telex
To transmit a telex message manually, the operator selects station, LES,
subscriber number, and manually transmits answerback code.
3.3.1
Manual telex procedure overview
3.3.2
Detailed procedure
1. At the standby display, press [F3] and [2] to display the Call LES display.
Press space bar to
display list.
2. Select appropriate LES, automatically (a) or manually (b)
a) Key in LES number (if one is already entered used the [Backspace] key to
delete it) and press the [Enter] key, or
b) Press the space bar to display the LES List. Operate the arrow keys to select
LES and press the [Enter] key.
3. Press the [ ↓ ] key to select Priority.
4. Press the space bar.
3-14
Key in LES number.
(Communication line with LES is
established.)
Key in subscriber's Telex number.
Transmit message.
Manual telex overview
1:
LES Access Code
2: Priority
3: Service Code
To open table: SPACE To input table: ENTER To quit: ESC
Call LES
:003(YAMAGUCHI)
:
Routine
:
Press [Enter] to manually
enter LES code.
Call LES display
Priority
1.
Routine
2. Safety
3. Urgent
Priority display
SEND
CANCEL
Press [ESC]
to return to
standby
display.