4.13.2
Enabling PIN usage
PIN usage is "disabled" in the default setting. When you enable it, you must enter
personal ID to dial from a telephone or facsimile.
1. Press [FUNC Quit], [6] and [6] to display Personal ID menu.
2. Press the [1] key to select Disable.
3. Press the [2] key to select Enable.
4. Press the [FUNC Quit] key to close the menu.
To disable use of the PIN select Disable at step 2 in the above procedure.
Note: With the PIN feature enabled, error results if a number is dialed without
entering PIN or if an unregistered PIN is entered.
4.13.3
Editing, printing the PIN list
PINs may be edited or deleted as necessary.
Editing the PIN list
1. Press [FUNC Quit], [6] and [6].
2. Press the [3] key to select Personal ID List.
3. Use the [ ] or [ ] key to select personal ID to edit.
4. Change data as necessary and press the [Ent] key.
4. HANDSET COMMUNICATIONS
6 6 P e r s o n a l
I D
P I D
M o d e
1
D i s a b l e
2
E n a b l e
S e l e c t : [ E n t ]
Personal ID menu
6 6 P e r s o n a l
I D
L i s t
U S E R
N A M E :
F U R U N O
P I D : 0 0 1
E d i t : [ E n t ]
Personal ID list
4-25