Opening Message Files - Furuno Felcom 82 Operator's Manual

Saving message file, closing screen
1. Press [F1] and [3] to select Close Text. The display should look something
like the figure shown below.
2. Press the [Enter] key.
3. Enter file name and press the [Enter] key.The message is saved and the
screen is cleared.
3.1.6

Opening message files

To open a message file from a floppy disk, do the following:
1. At the standby display, press [F1] and [2] to select Open Text. The display
shows a list of files stored on the disk. (Note that the directory MESSAGE is
automatically created when the a file is saved to a floppy disk.)
2. Select a file by operating the arrow keys and press the [Enter] key. (To view a
portion of a file, tap the space bar.)
3. To open another file on a blank screen select it with the arrow keys and press
the [Enter] key. To tack the file onto a file currently opened, use the [Tab] key
to select Merge before pressing the [Enter] key. (The default option (Load)
opens the file on a blank screen.)
Load:
Merge:
4. Press the [Enter] key.
3-8
Close Text
Save file?
(file name)
Close file prompt
Saving File Name
(file name)
Save file prompt
Load /Merge (TAB: Change)
[A: \MESSAGE\ MARINE.TXT
-File Name-
-Size-
<Parent Directory>
MARINE. TXT 15
FURUNO TXT 20
To select: ENTER To view: SPACE To quit: ESC
Press space bar to view first part of file.
Open text display
Open file on a blank screen.
Tack file at cursor location in file currently displayed.
YES
NO
Save Text
Open Text
-Date &
00-09-18
00-09-18
00-09-10
Time -
15:05
15:05
11:00