Test & Memory Clear] Menu; How To Set Or Change The Password - Furuno GP-3700 Operator's Manual

4. Select [0. NMEA2000 PGN].
5. Select a PGN to change.
6. Select [OUTPUT] or [NO OUTPUT].
7. Press the DISP key to close the menu.
9.6 [TEST & MEMORY CLEAR] Menu
This menu provides the diagnostic test, memory clearing, password setting, and track-
ball sensitivity. In this section, the password and trackball functions are described. For
the diagnostic test, see section 12.8, the memory and user data clearing, see
section 12.9.
9.6.1

How to set or change the password

You may use a password to prevent unauthorized operation of the equipment. The
equipment cannot be operated unless the correct password is entered, at the power-
ing of the equipment. Do not forget the password. If you forget the password, contact
your dealer for advice. (The serviceman can reset the password; however, all way-
points and marks will be erased.)
1. Press the MENU key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [6. TEST & MEMORY CLEAR].
Page 1
9. OTHER FUNCTIONS
Page 2
9-23