Table of Contents
Advertisement
3. TELEX COMMUNICATIONS
3.2.2
Detailed procedure
1. At the standby display (or "Editor" screen), press [F3] and [1] to display the
Auto Telex display.
You can also open the
Station Name list by
pressing the space
bar.
2. Press [1] or the space bar to display the Station List.
3. Operate arrow keys to select station and press the [Enter] key.
4. Press [2] to display the LES List.
5. Operate arrow keys to select LES and press the [Enter] key.
6. If you want to send the message currently displayed on the editor screen go
to step 8. To send a file stored on a floppy disk, insert appropriate floppy disk
in the disk drive on the terminal unit and press [3] to display the file list.
7. Operate the arrow keys to select file and press the [Enter] key.
8. Press the right arrow key to select "SEND".
SEND
CANCEL
3-12
1:
Station Name
[ Telex No. :
2: LES Access Code
3: File to Send
To open table: SPACE
Auto telex display
Station List
No.
: Station Name
01
: FURUNO
02
: MARINE
08
:
To select: ENTER
No. :
LES Code
001 :
003
008 :
To select: ENTER
To transmit
To escape
Auto Telex
:
]
:
(
)
:
To quit: ESC
To quit: ESC
Station list
LES List
:
LES Name
:
YAMAGUCHI
:
To quit: ESC
LES list
SEND
CANCEL
Press [Esc]
to return to
standby
display.
Advertisement
Table of Contents
