Table of Contents
Advertisement
4. Use [
], [
], [
cursor to "MIDI Thru," and use the TIME/VALUE dial
to change the setting to "Out."
MIDI Thru (MIDI Thru Switch)
This switches the function of the MIDI OUT/THRU
connector. The default setting is "OUT."
Out:
Out put MIDI message of VS-1824 Select this in case
you want to send out note message of metronome or
settings of mixer parameters (message of control
change or exclusive message).
Thru:
Out put the MIDI message coming from MIDI IN
connector (through-out).
5. Hold [SHIFT] and press [EXT SYNC].
The Sync/Tempo screen appears in the display.
fig.11-28
6. Use [
], [
], [
cursor to "Sync Gen.," and use the TIME/VALUE dial to
change the setting.
Sync Gen. (Sync Generator)
This determines on which clock the metronome is played.
Off:
Metronome is played on Tempo map.
MTC:
Metronome is played on Tempo map.
MIDIclk:
Metronome is played on Tempo map.
SyncTr:
Metronome is played on Sync track.
7. Press [EXIT/NO].
The System menu icon appears in the display.
8. Press [F5 (METRO)].
The Metronome Parameter screen appears in the display.
fig.11-29
], and [
] to move the
], and [
] to move the
Chapter 4 Recording Operations
9. Use [
], [
], [
cursor and use the TIME/VALUE dial to change each of
the settings.
Metronome Out
This selects where the metronome is output. For now,
select "MIDI." Selecting "Off" prevents you from
making any settings related to the Metronome.
Off:
The metronome sound is not output.
INT:
The metronome sound is output from the MONITOR
jacks.
MIDI:
The metronome signal is only transmitted via the
MIDI OUT connector.
Metronome Mode
This determines when the metronome is played.
Rec Only:
The metronome sounds only during recording.
Rec&Play:
The metronome sounds during playback and
recording.
Metro Level (Metronome Level)
This adjusts the volume level (0-127) of the metronome
output.
MID:Acc.Note (Accent Note)
This sets the note number (C0-G9) for the downbeat.
When a drum set is playing, this selects specific
percussion sounds.
MID:Nrm.Note (Normal Note)
This sets the note number (C0-G9) for the upbeats. When
a drum set is playing, this selects specific percussion
sounds.
MID:MetroCh (Metronome Channel)
This sets the MIDI channel (1-16) for transmitting
Metronome sound MIDI Note Messages.
MID:Acc.Velo (Accent Velocity)
This sets the velocity (1-127) for the downbeats.
MID:Nrm.Velo (Normal Velocity)
This sets the velocity (1-127) for the upbeats.
10. Press [PLAY (DISPLAY)] to return to the Playlist display.
], and [
] to move the
69
Advertisement
Table of Contents
