Table of Contents
Advertisement
Chapter 21 System and Global Settings
Holding [SHIFT] and pressing the [PREVIOUS] or [NEXT]
buttons will have the opposite effect of the Previous/Next
Sw setting on this screen. For example, if the Previous/Next
Sw is set to "PHRASE," holding [SHIFT] and pressing
[NEXT] will advance you to the next marker.
4. Press [PLAY (DISPLAY)] to return to the Playlist display.
Adjusting the Button Sensitivity
Several buttons on the VS-1824 change functions depending
on whether they are pressed once or held down.
STATUS button
When pressed:
When Held Down:
[EDIT/SOLO]
When pressed:
When Held Down:
[FADER/MUTE]
When pressed:
When Held Down:
You can specify the length of time the button must be held
down in order to use its secondary function.
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System Menu icon is displayed.
If the System Menu icon does not appear, press [F6 (EXIT)].
2. Press [F2 (GLOBL)].
If "GLOBL" does not appear above [F2], first press [PAGE]
until "GLOBL" appears, and then press [F2 (GLOBL)].
3. Use [
], [
], [
cursor to "Switching Time." Use the TIME/VALUE dial
to change the setting.
Switching Time
This sets the time a button must be held down (0.3-2.0
seconds) in order to use its secondary function.
4. Press [PLAY (DISPLAY)] to return to the Playlist display.
256
Changes track status.
Displays the "Input Assign"
screen and shows which inputs
or tracks are connected/routed
to the track.
Displays the Master Block
settings.
Turns on the SOLO function.
Toggles the physical fader
assignments from TR to IN.
Turns on the MUTE function.
], and [
] to move the
Fan Control
You may find the noise from the VS-1824's cooling fan to be a
concern when recording with a mic nearby. If this is the case,
you can program the VS-1824 to turn off the fan during
certain operations.
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System Menu icon is displayed.
If the System Menu icon does not appear, press [F6 (EXIT)].
2. Press [F2 (GLOBL)].
If "GLOBL" does not appear above [F2], first press [PAGE]
until "GLOBL" appears, and then press [F2 (GLOBL)].
3. Use [
], [
], [
cursor to "Fan Control." Use the TIME/VALUE dial to
change the setting.
Fan Control
This specifies which operations cause the cooling fan to
turn off.
Off:
The Fan Control feature is disabled. The fan operates
constantly.
Play:
The fan stops during playback.
Rec&Play:
The fan stops when Record Standby is enabled, and
stays off during recording and playback.
While the cooling fan is stopped for long periods of time,
heat can build up and, as a result, may damage the
internal hard drive. To avoid this problem, do not leave this
set to "Play" or "Rec&Play" for long periods of time. Keep
the fan running as much as possible with the Fan Control set
to "Off."
4. Press [PLAY (DISPLAY)] to return to the Playlist display.
], and [
] to move the
Advertisement
Table of Contents
