Table of Contents
Advertisement
Chapter 21 System and Global Settings
SCSI ID Number
When connecting SCSI devices to the VS-1824, the SCSI ID
number of each device connected must be set so none of the
devices have the same ID number. The VS-1824's ID number
is set to "7" at the factory. When connecting SCSI devices
(such as a Zip drive or a CD-R drive) to the VS-1824, be sure
to set the SCSI ID number for these devices to a number other
than "7." If no other SCSI ID number is available, it is
possible to change the SCSI ID number of the VS-1824.
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System Menu icon is displayed.
If the System Menu icon does not appear, press [F6 (EXIT)].
2. Press [F2 (GLOBL)].
If "GLOBL" does not appear above [F2], first press [PAGE]
until "GLOBL" appears, and then press [F2 (GLOBL)].
3. Use [
], [
], [
cursor to "SCSI Self ID."
4. Use the TIME/VALUE dial to change the setting for SCSI
Self ID.
SCSI Self ID
This sets the VS-1824's own SCSI ID number (1-7).
The SCSI ID number of the internal CD-RW
drive is fixed at "0."
5. Hold [SHIFT] and press [ZERO]. "STORE OK ?" appears
in the display.
6. Press [ENTER/YES]. The current song is saved.
7. Press [PLAY (DISPLAY)] to return to the Playlist display.
You must Restart the VS-1824 for the new SCSI ID
number to become effective.
254
], and [
] to move the
IDE Drive Switch
It is possible to use a VS-1824 with just an external hard drive
connected to the SCSI port, with turning the internal hard
drive OFF. You can turn off the internal hard drive with
following procedure.
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System Menu icon is displayed.
If the System Menu icon does not appear, press [F6 (EXIT)].
2. Press [F2 (GLOBL)].
If "GLOBL" does not appear above [F2], first press
[PAGE] until "GLOBL" appears, and then press
[F2 (GLOBL)].
3. Use [
], [
], [
cursor to "IDE Drive."
4. Use the TIME/VALUE dial to change the setting for IDE
Drive.
IDE Drive
When not using an internal hard drive, set this to "Off."
The default setting is "On."
5. Hold [SHIFT] and press [ZERO].
"STORE OK ?" appears in the display.
6. Press [ENTER/YES].
The current song is saved.
7. Press [PLAY (DISPLAY)] to return to the Playlist display.
The changed setting becomes effective the next time the
VS-1824 is turned on.
], and [
] to move the
Advertisement
Table of Contents
