Table of Contents
Advertisement
CD Player Function
You can use the CD-R/CD-RW drive to play a partially
recorded CD-R disc—a disc which has not been finalized (see
p. 185)—or to listen to commercially recorded CDs. To listen
to partially recorded CD-R discs, use the CD Player function.
* You can listen to the contents of the disc only through the
VS-1824's MASTER output, MONITOR output, or from the
PHONES jack. You cannot output the audio from the CD-R/
CD-RW headphone jack or AUDIO OUT jacks.
1. Insert the partially recorded CD-R disc or a pre-recorded
commercial CD into the CD-R/CD-RW drive.
For details refer to the column
"Inserting a CD" (see p. 234).
2. Press [PLAY (DISPLAY)].
3. Press [CD-RW/MASTERING].
4. Press [F3 (CDPly)].
The CD Player screen appears in the display.
Information is displayed as shown in the following:
fig.07-07
Current play time
Total running time
Total number of tracks
Disc type (finalized/not finalized)
Total number of songs on the disc
Song currently being performed
Chapter 13 CD-RW and Mastering
Only the following buttons, knobs, and faders can be
used in the CD Player function.
[ZERO]:
Goes to the start of the first song.
[REW]:
Rewinds as long as the button is held down.
* [REW] actives when be stooping.
[FF]:
Rapidly advances as long as the button is held down.
* [FF] actives when be stooping.
[STOP]:
Stops the CD.
[PLAY]:
Begins playback from the present location.
[PREVIOUS] or [
]:
Returns to the beginning of the previous song.
[NEXT] or [
]:
Advances to the beginning of the next song.
MASTER Fader:
Adjusts the overall volume.
MONITOR Knob:
Adjusts the volume output from the MONITOR jacks.
PHONES Knob:
Adjusts the headphone volume.
* When using the CD Player function, the transport control
buttons do not control standard VS-1824 transport functions.
* The audio playing from the CD-R/CD-RW drive cannot be
recorded back into the VS-1824.
* When listening to a partially recorded CD-R, the last 0.5
second (approximate) of the song cannot be played back until
the disc is finalized.
5. In the CD Player screen, the function buttons perform as
described below.
[F3 (Eject)]:
Ejects the CD-R/CD-RW tray.
[F5 (SelDr)]:
If more than one CD-R/CD-RW drive is connected to the
VS-1824, you can choose another drive to use.
[F6 (EXIT]:
Exits the CD Player screen and returns to the Song Menu
icon.
6. Use [
] and [
] to move the cursor to the CD
track you want to hear.
7. Press [PLAY] to begin CD playback.
191
Advertisement
Table of Contents
