Table of Contents
Advertisement
7. Press [
] to move the cursor to "Destination Drive."
8. Use the TIME/VALUE dial to select the destination drive
and partition. Press [F5 (SelDr)] to view a directory of
drives. Then use [
], [
select the destination drive, and use the TIME/VALUE
dial to select the partition. Once you have selected the
destination drive, press [F1 (Back)].
fig.06-09ab
9. If the source and the destination drives are different,
press [
]. Move the cursor to "Erase All Songs" and
use the TIME/VALUE dial to set the value.
Erase All Songs
When this is set to "On," the destination drive is
initialized before the copy procedure is performed. If
you want to perform the Song Copy procedure without
erasing any songs currently on the destination drive,
leave this setting "Off."
10. Press [F4 (Exec)]. A confirmation message appears in the
display.
11. Press [ENTER/YES]. "STORE Current ?" appears in the
display. Press [ENTER/YES] if you want to save changes
made to the current song, otherwise press [EXIT/NO].
12. When the Song Copy Playable procedure is finished, the
screen returns to the Playlist display.
If "Disk Memory Full" Appears in the
Display
This indicates the destination drive does not have
enough free space, or the number of songs on the
destination drive exceeds the maximum number (200
songs) that can be stored on the drive. If this message
appears, the Song Copy procedure is canceled.
], [
], and [
] to
Chapter 17 Using Hard Drives
Song Copy Archives
Use the following procedure to copy a song that cannot fit on
a single disk:
1. Select the drive containing the source song you want to
copy as the current drive (p. 228).
2. Press [PLAY (DISPLAY)].
3. Hold [SHIFT] and press [F1 (SONG)].
The Song menu icon is displayed.
4. Press [F2 (AcStr)].
If "AcStr" does not appear above [F2], press [PAGE] until
"AcStr" appears above [F2], and then press [F2 (AcStr)].
fig.06-10
5. Press [
] to move the cursor to "Source Song."
6. Use the TIME/VALUE dial to move the cursor to the
song you want to copy and press [F3 (MARK)]. By
pressing [F2 (ALL)], you can place and remove Marks
from all songs. Press [F1 (SelSg)] to view a directory of
songs. From here, after you have Marked the song(s) you
want to copy, press [F1 (Back)].
fig.06-10a
7. Press [
] to move the cursor to "Destination Drive."
225
Advertisement
Table of Contents
