Table of Contents
Advertisement
6. Make sure that the cursor is located at "Edit Target," and
use the TIME/VALUE dial to select the Automix data
that will be increased or decreased.
7. Use [
] and [
] to move the cursor to the first
marker of the Automix data you wish to increase or
decrease, and press [F1 (In)].
8. Use [
] and [
] to move the cursor to the last
marker of the Automix value that you wish to increase or
decrease, and press [F1 (Out)]. Checkmarks will be
added to the selected area.
fig.4-04.e
Check marks
Even if there is only one marker for the Automix data that
you wish to increase or decrease, press [F1 (In)] and then [F1
(Out)] for the desired marker.
You can turn the TIME/VALUE dial to modify the Automix
setting value at the cursor location. If you wish to re-select
the Automix data that will be edited, press [
9. Press [F5 (Exp)].
10. Use [
], [
], [
cursor. Use the TIME/VALUE dial to set the parameters.
Target
This will indicate the type of Automix data whose data will
be increased or decreased, as you selected in Step 6. If you
wish to shift or expand the values of all Automix data, use
the TIME/VALUE dial to select "All Level and Pan."
].
], and [
] to move the
Shift
Specify the actual amount (-50–50) by which the Automix
data values will be increased or decreased.
fig.4-25.e
Shift
0 M1
M8
Time
Expand
Specify the ratio (0.5–2.0) by which the Automix data values
will be increased or decreased relative to the "Threshold."
Threshold
When using Expand to increase or decrease the Automix
data values by a specified proportion, this specifies the center
value.
fig.4-26.e
Expand
Threshold
0 M1
M8
Time
11. To execute the Shift/Expand operation, press [F4 (Exec)].
If you press [F6 (EXIT)], you will return to Step 7 without
executing the Shift/Expand operation.
12. A message will ask you to confirm. Press [ENTER/YES].
If you press [EXIT/NO], you will return to Step 11
without executing the Shift/Expand operation.
fig.4-27_80
13. When the Shift/Expand operation has been completed,
the display will indicate "Complete." Press
[PLAY (DISPLAY)].
Chapter 9 Automix
137
Advertisement
Table of Contents
