Table of Contents
Advertisement
Chapter 7 Using Internal Effects (VS8F-2)
Example 2: Use a Microphone
Simulator on a Vocal Track to be
Recorded.
General Strategy: Insert the effect in the Input Mixer.
Details for this Example: Select Patch P128 as FX3, insert on
Input 2.
Begin by Selecting The Effect:
1. Press [PLAY (DISPLAY)].
2. Hold [SHIFT] and press [F4 (EFFECT B)].
3. Press [F1 (FX3)]. The Effect 3 screen appears in the
display. If "FX3" does not appear above [F1], press
[F6 (EXIT)] until it does. Then, press [F1 (FX3)].
4. Press [F2 (Sel)]. The effects list appears in the display.
5. Use the Time/VALUE dial or [
and [
] to move the cursor to Effect Preset Patch P128
"DR20
87."
6. Press [F4 (Exec)] or press [ENTER/YES] to select the
effect. The EFFECT 3 screen appears in the display.
Next, Set Up the Mixer
1. Press the SELECT button for Input 2. The button
indicator lights, and the Input Mixer Screen appears in
the display.
2. Use [
], [
], [
cursor to "FXIns." Or, press [F3 (FX3In)]. If "FX3In" does
not appear above [F3], press [PAGE] a few times until
you see "FX3In", and then press [F3 (FX3In)]. This will
move the cursor directly to "FXIns."
3. Press [ENTER/YES].
4. Use [
] and [
] to move the cursor to FX3. Use the
TIME/VALUE dial to change the Effect Insert Switch to
"Ins."
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
106
], [
], [
],
], and [
] to move the
Example 3: Place a Limiter on the
Stereo Mix Master Output
General Strategy: Insert the effect on the MIX bus.
Details for this Example: Select Patch P067 as FX2, insert on
Master Block.
Begin by Selecting the Effect
1. Press [PLAY (DISPLAY)].
2. Hold [SHIFT] and press [F3 (EFFECT A)].
3. Press [F4 (FX2)]. The Effect 2 screen appears in the
display. If "FX2" does not appear above [F4], press [F6
(EXIT)] until it does. Then, press [F4 (FX2)].
4. Press [F2 (Sel)]. The effects list appears in the display.
5. Use the TIME/VALUE dial or [
and [
] to move the cursor to Effect Preset Patch P067
"Limiter."
6. Press [F4 (Exec)] or press [ENTER/YES] to select the
effect. The EFFECT 2 screen appears in the display.
Next, Set Up the Mixer
1. Press [EDIT/SOLO]. The button indicator lights, and the
Master screen appears in the display.
2. Use [
], [
], [
cursor to "FXIns." Or, press [F2 (FX2In)]. If "FX2In" does
not appear above [F2], press [PAGE] a few times until
you see "FX2In", and then press [F2 (FX2In)]. This will
move the cursor directly to "FXIns."
3. Press [ENTER/YES].
4. Use [
], and [
] to move the cursor to FX2. Use
the TIME/VALUE dial to change the Effect Insert Switch
to "Ins."
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
], [
], [
],
], and [
] to move the
Advertisement
Table of Contents
