Table of Contents
Advertisement
Chapter 10 Track and Phrase Editing
EX1 : Phrase is shorter than interval of FROM and TO
A
FROM
Copy Times="2," Overlap="Off"
A
FROM
Copy Times="2," Overlap="On"
A
FROM
EX2 : Phrase is longer than interval of FROM and TO
A
FROM
TO
Copy Times="2," Overlap="Off"
A'
A
FROM
TO
Copy Times="2," Overlap="On"
A'
A
FROM
TO
About phrase copying
Please be careful if you copy 2 or more phrases at the
same time when Overlap is OFF. If the lengths of the
selected phrases are not exactly the same, you will find
that the beginning points of each phrase will be different.
If you want to carry out such a copying procedure, be
very sure the length of the selected phrases are the same.
Phrases captured simultaneously with punch in
recording or trimmed phrases using the Trim In/Trim
Out functions (see p. 159-160), for example, could be
used.
158
TO
Time
A'
A''
TO
Time
A'
A''
TO
Time
Time
A''
Time
A''
Time
EX : In case phrase length defers
A
B
C
FROM
Copy Times="2," Overlap="Off"
A
B
C
FROM
If you are setting Overlap to ON, you do not need to
select phrases with the same length. However, it is
possible that the ending part of the phrase could be
missed if the interval between FROM and TO do not
match the phrase length.
Copy Time
Specifies the times (1–99) of copying.
You cannot mix on one V track regularly recorded audio
with audio that has been recorded with the CDR Recording
Mode ON.
In Songs that use a Recording Mode other than "CDR"
follow these rules:
• Even on the mastering tracks, "CDR" V-tracks can only
be copied to V-tracks which already have been recorded
with "CDR" data, or to new V-tracks which have no data
recorded on them.
• V-tracks recorded within a song with a recording mode
other than "CDR" cannot be copied to mastering tracks
which are already recorded with the "CDR" recording
mode ON.
If the above rules are not followed, and the Copy
command would mix CDR audio with regular audio,
then "Found Illegal Track Pair!" appears in the display
and phrase move cannot be executed. Please press
[ENTER/YES] and select the move destination again.
10. Press [F4 (Exec)].
11. When the display indicates "Complete," press
[PLAY (DISPLAY)]. You will return to Play mode.
TO
Time
A'
A"
B'
B"
C'
C"
TO
Time
Advertisement
Table of Contents
