Phrase New - Roland VS-1824 Owner's Manual

24-bit digital studio workstation
Hide thumbs Also See for VS-1824:
Table of Contents

Advertisement

Phrase New

You can create a new phrase any time you wish from any
recorded take in the song.
Creating a New Phrase
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F2 (TRACK)].
3. Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.
4. Press [PAGE] so that [F3] indicates "New," and then
press [F3 (New)].
5. Press [F1 (Take)].
6. At this time, pressing [F3 (Sort)] will switch the order in
which the takes are sorted, cycling through the following
choices.
HIST:
The order in which the takes were recorded
The order of the V-Tracks on which the takes
V.Tr:
are recorded
NAME:
The alphabetical order of the take names
The order in which the takes were recorded
fig.6-05.e
The order of the V-tracks on which the takes are recorded
Chapter 10 Track and Phrase Editing
The alphabetical order of the take names
7. Use the TIME/VALUE dial to select the take that will be
the basis of the newly created phrase.
8. Press [F4 (Sel)] or [ENTER (YES)].
9. Use [
], [
], [
cursor, and use the TIME/VALUE dial to set the
parameters.
Take
This will show the take that you selected in Step 8. You
may re-select the take if desired.
Track
Select the track on which you wish to create the new
phrase.
To
Specify the time at which you wish to create the new
phrase.
10. Press [F4 (Exec)]. The Phrase New command will be
executed.
], and [
] to move the
161

Advertisement

Table of Contents
loading

Table of Contents