Writing Songs To Cd-R Discs - Roland VS-1824 Owner's Manual

Chapter 13 CD-RW and Mastering

Writing Songs to CD-R Discs

You can create a CD using a CD-RW disc, but it is impossible
to play back audio data recorded on a CD-RW disc using
most CD players, even if the disc is finalized. Audio data
recorded on a CD-RW disc can be played back using the "CD
Player Function" (p. 191) on the VS-1824. Consider using a
CD-R disc instead of a CD-RW disc—CD-R discs can be
played back on a wider variety of CD players.
1.
Make sure that the CD-R/CD-RW drive is properly
connected (see p. 194).
2. Place a blank CD-R disc in the CD-R/CD-RW drive.
For details refer to the column
"Inserting a CD" (see p. 234).
3. Press [CD-RW/MASTERING].
4. Press [F2 (CD Wt)].
5. "CD-R Write Ready ?" appears in the display. Press
[ENTER/YES].
6. "Store Current ?" appears in the display. Press
[ENTER/YES]. If you don't want to save any changes
made to the current song, press [EXIT/NO].
If the CD-RW disc you are using contains data, "Erase?"
appears in the display. To erase the existing data, press
[ENTER/YES]. "Erase Disc" appears and all the contents
of the CD-RW disc are erased. If you do not wish to erase
the data, press [EXIT/NO], and insert a new disc.
When erase is finished, "Can't be played back with
Audio CD player" appears in the display. This is to
confirm that regular audio CD players cannot play back
an audio CD made with a CD-RW disc. Press [ENTER/
YES]. Or press [EXIT/NO] to cancel the procedure.
188
7. Wait a moment for the CD-R Writer display to appear.
Press [F1 (SelTr)].
fig.07-05
8. Select the left and right tracks from the VS-1824 that you
want written to the CD-R. Use [
and [ ] and the TIME/VALUE dial to move the
cursor to the V-Track you want written as the left
channel of the CD-R, and press [F3 (Sel L)]. Move the
cursor to the V-Track you want written as the right
channel of the CD-R and press [F4 (Sel R)].
You can use [ ], and [
and then use the TIME/VALUE dial to select the desired
V-Track.
9. Press [F1 (Back)].
fig.07-06
Track which you want written as the right track
Track which you want written as the left track
Song Name
Internal IDE hard disk free space
Disk space occupied by a song when written to a CD-R disc
Size of the contentwritten to the CD-R disc
Length of the song which is to be written to the CD-R disc
Number of tracks after writing to the disc is finished
Number of Markers used for track numbers
Determining whether or not the CD-R disc has data written to it
], [ ], [
] to jump from track to track,
CD-R disc free space
],