Table of Contents
Advertisement
Foot Switch Settings
You can choose how the foot switch functions when an
optional foot switch—such as the Roland DP-2 or BOSS FS-
5U—is connected to the FOOT SWITCH jack.
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System Menu icon is displayed. If the System Menu
icon does not appear, press [F6 (EXIT)].
2. Press [F1 (SYSPM)].
If "SYSPM" does not appear above [F1], first press [PAGE]
until "SYSPM" appears, and then press [F1 (SYSPM)].
3. Use [
], [
], [
cursor to "Foot Sw."
If "Foot Sw" is not displayed, press [F1 (Prm1)].
4. Use the TIME/VALUE dial to change the setting for Foot
Switch.
Play/Stop:
Repeats playback and stop each time the foot switch is
pressed.
Record:
Performs the same function as [REC]. Use this setting for
performing punch-ins and -outs using a foot switch.
TapMarker:
Performs the same function as [TAP]. Pressing the foot
switch places a marker at the current position of the
song.
Next:
Performs the same function as [NEXT]. Moves to the
beginning or end of the next phrase each time the foot
switch is pressed.
Previous:
Performs the same function as [PREVIOUS]. Moves to
the beginning or end of the previous phrase each time
the foot switch is pressed.
GPI:
Controls playback and recording of the song depending
on the GPI trigger signal received from the FOOT
SWITCH jack.
GPI (See Appendices p. 12)
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
], and [
] to move the
Chapter 21 System and Global Settings
Global Settings
These are settings related to the overall operation of the VS-
1824. Unlike system settings, these settings are not set on a
song-by-song basis.
Shift Lock
Many functions in the VS-1824 are accessed by holding
[SHIFT], and then pressing a second button. If you find it
inconvenient to use two hands, you can set Shift Lock to
temporarily lock in the [SHIFT] button. This allows you to
perform most [SHIFT] functions with one hand.
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System Menu icon is displayed.
If the System Menu icon does not appear, press [F6 (EXIT)].
2. Press [F2 (GLOBL)].
If "GLOBL" does not appear above [F2], first press [PAGE]
until "GLOBL" appears, and then press [F2 (GLOBL)].
3. Use [
], [
], [
cursor to "Shift Lock."
4. Use the TIME/VALUE dial to change the setting for Shift
Lock.
Shift Lock
Set this to "On" to enable the Shift Lock function.
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
6. The [SHIFT] button indicator lights on and off each time
the button is pressed. [SHIFT] is in effect when the
indicator is lit. The [SHIFT] state changes when another
button is pressed or the TIME/VALUE dial is turned.
], and [
] to move the
251
Advertisement
Table of Contents
