Spare Tire Location And Removal - Jeep GLADIATOR 2023 Owner's Manual

There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
1 — Lug Wrench
2 — Long Extension Without Spring Clip 2
3 — Long Extension With Spring Clip 3
4 — Long Extension With Spring Clip 4
NOTE:
If the tailgate is lowered, the jack extension with hook can
be added to this assembly to enable lowering of the spare
tire without having to raise the tailgate.
CAUTION!
 The lug wrench can only be attached to extension 2.
 When attaching the tool to the winch mechanism be
sure the large flared end opening on extension 4 is
positioned correctly over the winch mechanism
adjusting nut.
 Damage to the lug wrench, extensions and winch
mechanism may occur from improper tool assembly
Assembled For Jack Operation
1 — Lug Wrench
2 — Long Extension 2
3 — Long Extension 3
4 — Long Extension 4
5 — Short Extension With Hook
IN CASE OF EMERGENCY
WARNING!
After using the jack and tools, always reinstall them in
the original carrier and location. While driving you may
experience abrupt stopping, rapid acceleration or sharp
turns. A loose jack, tools, bracket or other objects in the
vehicle may move around with force, resulting in
serious injury.
S T L A
PARE IRE OCATION ND
Remove the spare tire before attempting to jack up the
truck. The spare tire is secured under the rear of the
vehicle with a winch and cable mechanism.
Spare Tire Location
315
R
EMOVAL
7