Spare Tire Removal; Jacking Instructions - Jeep WRANGLER 2024 Owner's Handbook Manual

Hide thumbs Also See for WRANGLER 2024:
Table of Contents

Advertisement

2.
Remove the hardware storage cover by
pinching the latch on the left side and
pulling upward.
Hardware Storage Cover Latch
3.
Turn the plastic wing nut counterclockwise
to loosen the jack from the storage bin.
Plastic Wing Nut Location
4.
Remove tool kit and assemble tools.
EMERGENCY
60
S
T
R
PARE
IRE
EMOVAL
1.
To remove the spare tire from the carrier,
remove the tire cover, if equipped.
2.
Remove the Rear Camera Cover by turning
the lock bolt counterclockwise with the
#T40 torx head driver and ratchet from the
supplied tool kit.
Unlock Rear Camera Cover
3.
Remove the lug nuts with the lug wrench
turning them counterclockwise. If equipped,
remove the locking lug nut with the lock
key (located in the glove box) turning it
counterclockwise.
Removing The Spare Tire
J
I
ACKING
NSTRUCTIONS
WARNING!
Carefully follow these tire changing warnings
to help prevent personal injury or damage to
your vehicle:
Always park on a firm, level surface as far
from the edge of the roadway as possible
before raising the vehicle.
Turn on the Hazard Warning Flashers.
Apply the parking brake firmly and shift an
automatic transmission into PARK; a manual
transmission into REVERSE.
Block the wheel diagonally opposite the
wheel to be raised.
(Continued)

Advertisement

Table of Contents
loading

Table of Contents