Mitsubishi MELSEC-Q Series User Manual page 94

2
SYSTEM CONFIGURATION
(2) When using the High Performance model QCPU
Memory card *
2
- 41 2.2 Configuration of peripheral devices
1
PC card adapter
* 1: Do not format the ATA card by other than GX Developer.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
* 2: It is not used for the Q02CPU.
* 3: For writing into memory card by GX Developer and information on USB cables, refer to the
operating manual of the GX Developer.
* 4: The available version varies depending on the system configuration. (
Diagram 2.24 Configuration of peripheral devices
POINT
For connection between the Motion CPU, PC CPU module or C Controller module
and peripheral in the multiple CPU system, refer to the manual of each CPU
module.
High Performance model QCPU
1
Memory card *
PC (GX Developer, GX Configurator) * 4
RS-232 cable
USB cable *
Section 2.3)
2, 3
*