Mitsubishi MELSEC-Q Series User Manual page 88

2
SYSTEM CONFIGURATION
2
- 35 2.1 System configuration
2.1.3 System configuration using Universal model QCPU as CPU No.1
POINT
(1) The Q02UCPU is not available for the multiple CPU system.
(2) When the multiple CPU system is configured using the Universal model
QCPU (except Q02UCPU) or the Process CPU as the CPU No.1, only the
following modules can be used as the CPUs No.2 to CPU No.4.
• High Performance model QCPU
• Process CPU
• Universal model QCPU (except Q02UCPU)
(3) When duplicating power supply, use the redundant power supply base unit
and the redundant power supply module.
For the power supply module mounted on the redundant power supply base
unit, only the redundant power supply module can be used.