Mitsubishi MELSEC-Q Series User Manual page 58

2
SYSTEM CONFIGURATION
(2) When using the slim type main base unit (Q3 SB)
2
- 5 2.1 System configuration
2.1.1 System configuration using Basic model QCPU (Q00CPU, Q01CPU)
(a) System configuration
Battery for
QCPU (Q6BAT)
* 1: The slim type main base unit does not have an extension cable connector.
The extension base unit and GOT cannot be bus-connected.
* 2: As a power supply module, use the slim type power supply module.
Keep the current consumption within the rated output current of the power supply module.
The Q series power supply module and the redundant power supply module are not available for
the power supply module.
Diagram 2.3 System configuration when Q3
POINT
When the multiple CPU system is configured using the Basic model QCPU as the
CPU No.1, only the C Controller module can be used as the CPU No.2.
Basic model C Controller
QCPU module
Slim type main base unit *
Slim type power supply/input/output/intelligent
function module
1, * 2
SB is used