Mitsubishi MELSEC-Q Series User Manual page 142

3
CONCEPT FOR MULTIPLE CPU SYSTEM
(2) Access to controlled module and non-controlled module
High
Performance
Note3.3
Basic Process
Note3.4
Note3
Note4
High
Performance
Note3.3
Basic
Process
Note3.4
3
- 31 3.7 Access range of GX Developer
GX Developer can access the modules regardless of whether they are controlled or
non-controlled by the QCPU connected to the GX Developr.
By connecting GX Developer to a single QCPU, it is possible to perform monitoring
and tests on all modules being controlled by the multiple CPU system's QCPU.
The QCPU on another station in the same MELSECNET/G
MELSECNET/H or Ethernet network can also be
Diagram 3.32 Access to controlled module and non-controlled module
The MELSECNET/G can only be used with the High Performance model QCPU whose first serial
number is 08102 or later.
The MELSECNET/G cannot be used with the Basic model QCPU and the Process CPU.
accessed.Note4
CPU 0 1 2 3 4
1 2 1 1 2 2
Access allowed
Note3.3 Note3.4
,Note3
Slot number
Control CPU setting