Mitsubishi MELSEC-Q Series User Manual page 222

6
PARAMETER ADDED FOR MULTIPLE CPU SYSTEM
Note1
I/O assignment
PLC system
Multiple CPU
settings
High
Basic
Performance
Note6.1
*
1:Necessity of setup column
*
2:Necessity of same setting column
Note1
High
Basic
Performance
Note6.1
6
- 2 6.1 Parameter list
Table6.1 Setting list for the multiple CPU and I/O Assignment
PLC parameter
I/O Assignment
Type
Model name
Points
StartXY
Base setting
Base model name
Power model name
Extension cable
slots
Switch settings
Detailed settings
Error time output mode
H/W error time PLC operation mode
I/O response time
Control PLC
Points occupied by empty slot
No. of PLC
Operation mode
Online module change
All CPUs can read all inputs
All CPUs can read all outputs
Communication area setting (Refresh setting)
Send range for each PLC
PLC side devices
: Items that must be set up for multiple CPU system (operations not possible if not set up.)
: Items that may be set up when required for multiple CPU system
---- : Items that are the same as single CPU system.
: Items that must be the same settings for all CPU modules on the multiple CPU system.
: Items that must be the same settings for all QCPUs and PC CPU module on the multiple
CPU system
(items that do not have settings for Motion CPUs).
---- : Items that can be setup up individually for each CPU modules on the multiple CPU system.
For the Basic model QCPU, the online module change cannot be set.
For the High Performance model QCPU, modules cannot be changed online. To change a
module online with the Process CPU, select "Enable online module change with another PLC.".
Necessity
of setup
----
----
----
----
----
----
----
----
----
----
----
----
----
Note6.1
Necessity
of same
Reference
*1
*2
setting
----
QCPU User's Manual
----
(Function
----
Explanation, Program
----
Fundamentals)
----
----
----
----
Section 6.1.6
QCPU User's Manual
(Function
Explanation, Program
Fundamentals)
Section 6.1.1
Section 6.1.2
Section 6.1.3
Section 6.1.4
Section 6.1.5
----