Mitsubishi MELSEC-Q Series User Manual page 73

2
SYSTEM CONFIGURATION
(3) When using the slim type main base unit (Q3 SB)
(a) System configuration
Battery for QCPU (Q6BAT)
Battery holder
Q8BAT connection cable
2.1.2 System configuration using High Performance model QCPU or Process CPU as CPU No.1
1
Memory card *
Q7BAT-SET
Battery for QCPU (Q7BAT)
* 4
Q8BAT-SET
Battery for QCPU (Q8BAT)
* 1: One memory card is installed. Select an appropriate memory card from the SRAM, Flash and
ATA cards according to the application and capacity.
When the memory card is used, operation is not guaranteed.
* 2: The slim type main base unit does not have an extension cable connector.
The extension base unit and GOT cannot be bus-connected.
* 3: As a power supply module, use the slim type power supply module.
Keep the current consumption within the rated output current of the power supply module.
The Q series power supply module and the redundant power supply module are not available for
the power supply module.
* 4: When the Q8BAT is used for the Universal model QCPU, use the connection cable whose
connector part displays "A".
For details of connector part of a connection cable, refer to the following manual.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
* 5: For memory cards that can be used with the C Controller module, refer to the manual of the C
Controller module.
Diagram 2.11 System configuration when Q3 SB is used
High Performance
C Controller
model QCPU
4, 5
module * *
Universal model
4
QCPU *
Slim type main base unit *
Slim type power supply/input/output/
intelligent function module
2.1 System configuration
1
2
3
2, * 3
4
5
6
7
8
2
- 20