Mitsubishi MELSEC-Q Series User Manual page 109

2
SYSTEM CONFIGURATION
Product
CC-Link IE controller network
*5
module
Q series MELSECNET/H
network module
Q series Ethernet interface
module
Q series CC-Link system master/
local module
Interruption module
GOT
(c) When using the Universal model QCPU
Table2.23 Modules of restricted quantity
Model
• QJ71GP21-SX
• QJ71GP21S-SX
• QJ71LP21
• QJ71BR11
• QJ71LP21-25
• QJ71LP21S-25
• QJ71LP21G
• QJ71LP21GE
• QJ71E71
• QJ71E71-B2
• QJ71E71-B5
• QJ71E71-100
• QJ61BT11N
• QI60
• GOT1000 series (Bus
*2
connection only)
* 1: One CPU module with CC-Link network parameter setting in GX Developer can control the
following number of the CC-Link master/local modules.
• Q02UCPU: up to 4
• Except Q02UCPU: up to 8
There is no restriction on the number of mountable modules when setting parameters with the
CC-Link dedicated instructions.
CC-Link Master/Local Module User's Manual
* 2: For the model name of the applicable GOT, refer to the following manual.
GOT1000 Series Connection System Manual
* 3: The number of interrupt modules where the interrupt pointer setting is not made is shown.
If set, there is no restriction on the number of mountable modules.
* 4: As for the Q02UCPU, both the number of mountable modules per QCPU and the number of
mountable modules per system are up to two respectively.
* 5: When the following CPU module is used in a multiple CPU system configuration, "Number of
mountable modules per system" and "Number of mountable modules per CPU" for CC-Link IE
controller network modules are up to two respectively.
• High Performance model QCPU
• Process CPU
Number of modules that can
be mounted per system
*4
Up to 4 modules
*4
Up to 4 modules
*1
No restriction
*3
Up to 4 modules
Up to 5 modules
2.4 Precautions for system configuration
Quantity restriction per QCPU
*4
Up to 4 modules
*4
Up to 4 modules
*1
No restriction
*3
Only 1 module
Up to 5 modules
2
- 56
1
2
3
4
5
6
7
8