H2 Stationary GrainGage User's Guide
2. 3.9 Update H2 Stationar y GrainGage Firmware
2. 3.10 Create and Record Barcode Traits
Traits
Mirus and H2 Stationary GrainGage Setup
This option can be found on the Setup > H2 GrainGage >
Firmware screen.
As an operator, it is unlikely you will need this screen.
When you install or update Mirus, the program will check
for the latest firmware and update it then. The purpose of
this screen is mostly to help HarvestMaster Field Service
Engineers during troubleshooting procedures.
This option can be found on the Setup > Traits screen.
32