H2 Stationary GrainGage User's Guide
2. 3. 5 Conf igure Moisture Sensors
On the Setup > H2 GrainGage > Sensors screen,
1. Tap Moisture.
Mirus opens the Moisture Sensor Setup screen where you can configure the moisture setting for the
GrainGage.
Moisture Sensor Settings
Setup Parameter
Moisture Tare
Warning
Note: To edit other moisture settings see 4.2.3 Moisture Calibration on page 50.
Mirus and H2 Stationary GrainGage Setup
Default Value
Description
A tare warning is generated above this threshold when the
1%
chamber is empty .
29