Table of Contents
Advertisement
H2 Stationary GrainGage User's Guide
6 .3 Configure Harvest Screen Options
The Harvest screen provides several options for configuring how data is collected and presented during
harvest.
1. Start/Cycle/Go Button: Start initiates harvest. Cycle initiates measurements and data collection for a
specific plot. Go indicates it's time to move to the next plot.
2. Diagnostics: Opens the Diagnostics dialog box for monitoring during harvest.
3. Cycle Settings: Allows the operator to change the settings for the Start/Cycle/Go button.
4. Navigation: Opens the Change Location dialog box and allows the operator to make changes to
location, direction, and navigation type. This feature is not needed with the H2 Stationary GrainGage.
5. Observations: Opens a dialog box in which the operator can record notes for each plot during
harvest. This is also where you can add information about any traits you configured.
6. Graph View: Displays accumulating data as a graph.
7. Quad View: Divides the display into four smaller windows. The operator can adjust the size of each
window and customize them each to display data in Cycle Data, Diagnostics, Graph, Info, List,
Spatial, or Real Time Weight view.
8. Map View: Opens the Spatial Display, also referred to as a heat map. This display can be configured
to show attribute data plot by plot.
9. List View: Displays accumulating data as a list.
10. Ten Key: Numeric keypad for fast entry of trait and note data.
Harvest Mode
1
2
3
4
5
6
7
8
9
10
74
Advertisement
Table of Contents
