Table of Contents
Advertisement
H2 Stationary GrainGage User's Guide
The following tables display the default values for each actuator:
Evacuation Gate Settings
Setup Parameter
Actuator
Limit Switch on
Close
Limit Switch on
Open
Note: Preconfigured values are default values based on generalized harvest conditions. They may not
reflect the optimum settings for the harvest conditions for your particular climate, fields, or grains.
Changing default values requires a certain level of experience. Please contact HarvestMaster Field Service
Engineers when adjusting these settings. See 8.4.2 Contact a HarvestMaster Field Service Engineer on
page 93.
Note: For calibration instructions, see Chapter 4 H2 Stationary GrainGage Calibration on page 45.
2. 3. 3 View GrainGage Info
Mirus and H2 Stationary GrainGage Setup
Default Value
Description
Electro-
The type of actuator .
Mechanical
No
Enables the limit switch when the gate closes .
This is not supported in the H2 Stationary .
No
Enables the limit switch when the gate opens .
On the Setup > H2 GrainGage screen,
1. Tap Info.
Mirus opens the Info screen where you can view Chamber,
Module, and Sensor information for the H2 GrainGage.
26
Advertisement
Table of Contents
