Configure Weight In Spatial Display - Juniper HarvestMaster GRAINGAGE H2 STATIONARY User Manual

H2 Stationary GrainGage User's Guide
6 . 3.8 Conf igure Weight in Spatial Display
To set the minimum and maximum weight,
1. Tap the Spatial Display icon
2. Select the Weight attribute.
3. Tap the gear icon
4. Set the Minimum and Maximum Weight.
5. Tap the check icon
Adjusting the minimum and maximum values helps to create a more detailed legend and define the
scope of the graphs and maps. The narrower the minimum and maximum range, the more detailed the
information displayed becomes.
Set the minimum
and maximum
weight.
This setting adjusts the maximum weight on the Real Time Weight display, which allows you to track how
full the GrainGage is getting with each plot. This is important to monitor so the GrainGage doesn't overflow.
Maximum
weight is
adjusted on
the Real Time
Weight display.
Harvest Mode
to display data in a heat map format.
in the Attribute bar.
.
Tap the
gear icon.
Select the
weight
attribute.
83