Set Up The Barcode Scanner - Juniper HarvestMaster GRAINGAGE H2 STATIONARY User Manual

H2 Stationary GrainGage User's Guide
2. Tap the down arrow for Mirus Harvest Software.
3. Select and download the most recent Mirus release.
4. Open the file and follow the installation instructions.
5. Go to http://www.harvestmaster.com/activate
6. HarvestMaster will send the unlock code via email.
7. Return to the Mirus activation screen and input the unlock code.

1.1. 5 Set Up the Barcode Scanner

Introduction to the H2 Stationary GrainGage
and fill out the form.
On the Mesa 3,
1. Open Barcode Connector.
2. On the Home screen under Startup, verify the
following are checked:
• Start up Barcode Connector on bootup
• Start Barcode Connector minimized
3. Tap the Menu icon in the top left corner.
4. Select User.
5. Verify P2 is selected under "Select Scan Button."
The barcodes can now be scanned when P2 is pressed on
the Mesa 3.
6. Minimize Barcode Connect.
Note: Barcode Connector should be open and running in
the background on each Mesa 3. It can be minimized.
11