Appendix A: Standard Grain Information; Standard Moisture And Test Weight - Juniper HarvestMaster GRAINGAGE H2 STATIONARY User Manual

H2 Stationary GrainGage User's Guide

7 Appendix A: Standard Grain Information

7 .1 Standard Moisture and Test Weight

Test weight should always be calculated with a sample that is as close to the industry moisture standard as
possible. The table below shows some examples of the industry moisture standard. Test weight is not used
with the H2 Stationary GrainGage.
*These measurements are based on the United States (Winchester) bushel.
Devkota P., & Mulvaney M. J. (2020, May). Adjusting crop yield to a standard moisture content. IFAS
Extension, University of Florida. https://edis.ifas.ufl.edu/pdf%5CAG%5CAG44200.pdf.
Isleib, J. (2012, August 6). Test weight in small grains. Michigan State University Extension.
msu.edu/news/test_weight_in_small_grains.
Appendix A: Standard Grain Information
Standard Moisture and Test Weight
Grain
Wheat
Canola
Soybean
Barley
Corn
Rye
Sorghum
Oats
Sunflower
References for Standard Moisture and Test Weight
Moisture Test Weight
60 lb/bu
13 .5%
(77 kg/hL)
47 lb/bu
8 .5%
(60 kg/hL)
55 lb/bu
13%
(71 kg/hL)
48 lb/bu
14 .5%
(62 kg/hL)
56 lb/bu
15 .5%
(72 kg/hL)
56 lb/bu
14%
(72 kg/hL)
56 lb/bu
13%
(72 kg/hL)
32 lb/bu
13 .5%
(41 kg/hL)
25 lb/bu
10%
(32 kg/hL)
https://www.canr.
88