Juniper HarvestMaster GRAINGAGE H2 STATIONARY User Manual page 86

H2 Stationary GrainGage User's Guide
5. Scan the barcode.
6. Dump the grain into the GrainGage.
7. Tap Cycle
8. Scan the barcode for the next plot.
9. When prompted with a green Go button
10. Repeat for each plot.
Harvest Mode
when all the grain is in the GrainGage.
Note: HarvestMaster recommends having the same
person dump the grain directly onto the moisture blade in
the same way every time. The picture to the left shows the
minimum amount of grain needed to cover the moisture
blade.
, dump the grain for the next plot.
86