H2 Stationary GrainGage User's Guide
1. 2.1 Unpack the GrainGage
Introduction to the H2 Stationary GrainGage
1. Use the folded legs of the GrainGage to lift it out of the
box.
Bubble Level
Legs
2. Adjust the leg position by removing the leg pins and
rotating the legs down.
Cycle position holes
Leg pin
3. Align the pinhole in each leg with a cycle position hole
in the GrainGage.
4. Insert the leg pin for each leg.
5.
Use the bubble level on top of the GrainGage to verify
the GrainGage is level and stable.
13