Table of Contents
Advertisement
H2 Stationary GrainGage User's Guide
9 Appendix C: Limited Warranty
9 .1 Software
Software products that are designed by Juniper Systems for use with a hardware product and that are
properly installed on that hardware product are warranted to the end user not to fail to execute their
programming instructions due to defects in material or workmanship for a period of one year from the
date of delivery.
If Juniper Systems receives notice of such defects during the one year warranty period, Juniper Systems
shall, at its option, repair or replace the defective software media. Warranty is limited to repair or
replacement of software media.
The warranties provided herein do not apply in the case of improper or inadequate maintenance or
in the case of repair by any person not previously authorized in writing by Juniper Systems to do such
maintenance or make such repairs.
These warranties likewise do not apply where the products have been operated outside the environmental
specification of the product, where software products other than those specified by Juniper Systems
have been used, or where attempts at software interface have been made by any person not previously
authorized by Juniper Systems to perform such interfacing operations.
9 .2 Disclaimer of Warranties
The warranties set forth herein are in lieu of all other warranties of Juniper Systems, whether written, oral
or implied. Juniper Systems makes no warranties regarding its products (hardware or software), including
without limitation warranties as to merchantability, fitness for a particular purpose, any warranty arising
from course of performance, course of dealing, or usage of trade whether any of the foregoing warranties
are either expressed or implied. Juniper Systems specifically makes no warranties as to the suitability of its
products for any particular application. Juniper Systems shall in no event be liable for special, incidental,
or consequential damages in connection with or arising out of the furnishing, performance or use of any
product covered by this agreement whether such claim is based upon warranty (express or implied),
contract, strict liability, negligence or otherwise.
9 .3 Updates or Modifications
Juniper Systems shall be under no obligation to update or modify its products except as herein noted
to correct program errors. Furthermore, the customer agrees that all representations and warranties
contained herein shall be immediately null and void in the event of any modification, alteration or change
in or to any product affected by or on behalf of the customer except for a change made by Juniper
Systems.
9 .4 Removal of Serial Number
Removal of the Juniper Systems serial number label from an instrument will void any warranty on the said
instrument. Juniper Systems will not repair or update an instrument and return it to an individual if the
instrument is without the said serial number label.
9 .5 Extended Warranties
Juniper Systems offers a variety of warranty options to extend coverage beyond the standard warranty. You
can contact Juniper Systems Customer Service Department for details at (435) 753-1881 (6 am – 5 pm MT,
Mon–Fri).
Appendix C: Limited Warranty
95
Advertisement
Table of Contents
