Mirus for H2 Classic GrainGage
2. 3.9 Reset the H2 Classic GrainGage to Factor y Settings
2. 3.10 Update H2 Classic GrainGage Firmware
Mirus and H2 Classic GrainGage Setup
This option can be found on the Setup > H2 GrainGage >
Factory Reset screen.
CAUTION: This cannot be undone! Resetting
the GrainGage to factory defaults will clear all
your settings, including actuator timers and
weight calibrations. This should only be done in
consultation with a HarvestMaster Field Service
Engineer.
This option can be found on the Setup > H2 GrainGage >
Firmware screen.
As an operator, you are not likely to need this screen.
When you install or update Mirus, the program will check
for the latest firmware and update it then. The purpose of
this screen is mostly to help HarvestMaster Field Service
Engineers during troubleshooting procedures.
28