Passing On Parameter Assignment Data From The Pd / Pc With Im 153-2 - Siemens SIMATIC ET 200M Operating Instructions Manual

3.3.2

Passing on parameter assignment data from the PD / PC with IM 153-2

Example configuration with IM 153-2 and a HART module
You can use HART modules in the ET 200M In this application, the ET 200M HART is a master
for HART slaves (intelligent field devices) in the Ex area. The IM 153-2 passes on parameter
assignment data from the PD / PC via the HART analog input module to the intelligent field
devices and back again (the thick line indicates the communication path). For a detailed
description, please refer to "S7-300 Automation Systems, ET 200M Ex I/O Modules
(http://support.automation.siemens.com/WW/view/en/1096709)" in the device manual.
Figure 3-2
①
②
③
④
⑤
⑥
ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
Passing on parameter assignment data with an IM 153-2 and HART modules
IM 153-2
For example: SM 331; AI 2 x 0/4 ... 20 mA HART
Intelligent field devices
PROFIBUS DP
PD/PC
DP master
3.3 Configuration possibilities for PROFIBUS DP
Assignment planning
37