Table of Contents
Advertisement
OPTION menu
OPTION menu
Select an item from the Option menu using the ▲/▼
cursor buttons, and press the ► cursor button or
ENTER button to execute the item. Then perform it
according to the following table.
Item
SEARCH SKIP
AUTO SEARCH
(continued on next page)
The ports can be set to be ignored in searching by the AUTO
SEARCH function (below) or in selecting by buttons on the control
panel.
(1) Choose a picture input port using
the ▲/▼ buttons.
(2) Using the ◄/►buttons turns on/off
the SEARCH SKIP function.
NORMAL ó SKIP
The port that is set to SKIP is ignored.
• You cannot set SKIP to all ports at the same time.
• This setting is not valid when in the PbyP / PinP mode (61) .
Using the ▲/▼ buttons turns on/off the automatic signal search
function.
ON ó OFF
When ON is selected, detecting no signal automatically cycles
through input ports in the following order. The search is started
from the current port. When an input is found, the projector stops
searching and display the image.
LAN ð COMPUTER IN ð HDMI 1
VIDEO
3G-SDI ï HDBaseT ï DisplayPort
Description
HDMI 2
98
QM00971-1
Advertisement
Table of Contents
