Table of Contents
Advertisement
Item
BLANK
AUTO BLANK
START UP
(continued on next page)
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature
(44) . It is displayed by pressing the AV MUTE button on the
remote control.
MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK
MyScreen : Screen can be registered by the MyScreen item (94).
ORIGINAL : Screen preset as the standard screen.
BLUE, WHITE, BLACK : Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen changes to the AUTO BLANK screen after several minutes.
NOTE
• Refer to "Regarding the indicator lamps"(131) about
the indicator when Blank(black) or AV Mute(black) is on.
Using the ▲/▼ buttons switches the mode for the AUTO BLANK
screen.
BLUE ó WHITE ó BLACK
• To avoid remaining as an afterimage, displayed image changes
to the designated blank color screen by AUTO BLANK after several
minutes at the following conditions.
- When MyScreen or ORIGINAL is displayed as BLANK screen.
- When start-up screen is displayed.
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ó ORIGINAL ó OFF
MyScreen : Screen can be registered by the MyScreen item (94).
ORIGINAL : Screen preset as the standard screen.
OFF : Plain black screen.
• To avoid the image burning into the screen, the START UP screen
changes to the AUTO BLANK screen after several minutes.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu (118) , the START UP is fixed to MyScreen.
Description
93
SCREEN menu
QM00971-1
Advertisement
Table of Contents
