Table of Contents
Advertisement
Setting up
Connecting with your devices (continued)
• The HDMI ports of this model are compatible with HDCP (High-band-
NOTE
width Digital Content Protection) and therefore capable of displaying video
signals from HDCP compatible DVD players or the like.
- The HDMI ports support the following signals:
Video signal : See the Operating Guide - technical for details.
Audio signal : Format Linear PCM
Sampling frequency 48kHz / 44.1kHz / 32kHz
Computer signal : See the Operating Guide - technical for details.
- This projector can be connected with another equipment that has HDMI
connector, but with some equipment the projector may not work properly,
something like no video.
- Qualified cable is required for HDBaseT connection.
- Use an HDMI
TM
- Use a Category 2-certified HDMI
projector.
- When the projector is connected with a device having DVI connector, use a
DVI to HDMI
TM
• The HDMI
cables might come off due to the lack of a mechanical lock on
TM
the cables and connectors.
• This projector has HDMI input/output ports and can be connected to multiple
devices such as projectors or monitors with HDMI cable.
• The projected image is output when HDMI 1 or HDBaseT is selected.
• The resolution of the signal input to the projector and signal output from the
projector may be restricted by the maximum resolution of the connected device
such as projector or monitor.
• HDMI output operation in normal standby depends on the setting of the menu
(90). It is not output when standby mode is NETWORK(WOL) or SAVING.
• When outputting HDMI signal, turn on the output side connected device
before inputting image signal to the projector.
• Up to 4 devices can be connected in series for HDMI output port of this
projector.
• The number of devices that can be connected varies depending on HDCP
version, the restriction of the number of devices for HDCP repetition of source
device, and the quality of a cable.
• The projected image from the projector may be interrupted when POWER
OFF/ON, input switching, or HDMI cable removal/insertion is executed on the
second or subsequent projector or monitor.
• HDMI output may be interrupted when the projector is turned on/off.
(continued on next page)
cable that has the HDMI
cable to connect with the HDMI
logo.
TM
cable to input 1080p@50/60 signal to the
TM
input.
TM
3 2
TM
QM00971-1
Advertisement
Table of Contents
